Skip to main content

V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver

 V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver
 V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver  V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver  V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver



Features:

Professional intelligent dual wireless microphone system with VHF 170-280MHz section, wide frequency response and high signal-to-noise ratio performance.
High-precision quartz crystal frequency-locking technology that resists strong interference and minimizes RF interference and noise generated by other electronic and digital devices.
A double-way channel design: Smooth expression without interference, providing clear, noise-free wireless transmission and excellent sound reproduction.
Dual independent antennas: Features VHF wireless system to have more transmitter range and be less prone to electric appliance interference.
VHF narrowband system, dual frequency design(channel A/B). Dual channel voice distribution, independent adjustable volume control. With LCD screen.
In a good environment, a wide range of about 90-120ft, 1/4-inch mixed audio output jack, external amplifier or speaker, mixer, etc.
The microphone system complies with the new FCC frequency rules. Fixed frequency: 230.80MHz, 255.80MHz, Frequency stability:=<0.002%, Dynamic range:>70dB, low distortion rate:<0.5%.
VHF wireless microphone receiver system with 2 handheld microphones.
Professional wireless microphone and receiver, easy to synchronize in two channels, simple setup and installation allows  you to transmit clear sound immediately.
Whether used for vocal performances, karaoke or conference room presentations on the stage, this wireless microphone with today's latest system technology will allow you to enjoy a trouble-free and reliable wireless sound transmission experience.
 
Specification:

- Handheld microphone:
Modulation Mode: FM
RF Power Output: > 13dBm
Modulation: > 30KHz
Power Current: <110mA
Frequency Stability: =<0.002%
Height Harmonic: <60dB
Battery Powered:(2) x 'AA' Batteries -Each
- System Receiver:
Channel Frequency: VHF 230.8MHz, 255.8MHz
Frequency Stability: =<0.002%
Sensitivity: 30 dB S/N 3uv
RF Image Rejection: -75dB
Audio Dynamic Range: >70 db
Audio Response: 100 Hz-15KHz
T.H.d: <0.5%
Signal to Noise Ratio: > 70dB
Frequency Response: 50Hz~15KHz±3dB
Audio Output Level: 0-280mV
 
Package included:

1 x 2 Channel VHF Receiver
2 x Hand-held Microphones
1 x Power Adapter
1 x Audio cable
1 x English User Manual
 




















V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver See detail


Popular posts from this blog

Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector

Get Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector Feature: Rated Voltage: 600V/2.5KV Rated Current: 32A Soild Wire Size: 0.08-2.5mm 2 /28-14AWG Multi-folded Soft Wire Size: 0.08-4mm 2 /28-12AWG Strip Length: 9-10mm/0.35-0.39inch Plastic Material: PA66 V-2 Shrapnel: Stainless Steel Contact Material: Electrolytic Copper Nickel Tin Ambient Temperature: -40 ~ +105 degree Package included: 1 x SPL-4 Wire Connector Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector See detail

RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag

Get RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag Features : -The MF RC522 is a highly integrated read/write card chip for 13.56MHz contactless communication. -This module can be directly loaded into various reader molds. The module adopts a voltage of 3.3V. -It can be directly connected to any CPU board of the user through several simple lines of the SPI interface, which can ensure stable and reliable operation of the module and long reading distance. - The module uses SPI to communicate with microcontrollers. The open-hardware community already has a lot of projects exploiting the RC522 – RFID Communication, using Arduino. RC522 - RFID Reader / Writer Features - Integrated MF RC522 - Low-voltage, low-cost, small size of the non-contact card chip to read and write - Suitable for Smart meters and portable handheld devices - Advanced modul