Feature:
Resolution: 128X160
Driver IC: ILI9163/ST7735
Module with regulator IC supports 3.2V/5V power supply
With SD card holder, you can do experiments like digital photo frame
The module reserves the Nokia3310/5110 interface, supports the 1602 interface, and directly plugs in and out.
IO for streamlined wiring: (only 3 IOs after optimization)
1. RST-- directly connected to the microcontroller reset signal terminal, this IO can save
2. D/C-- is connected to low level, and the chip selection is long-term effective.
3. D/C--connected to IO control register selection
4. DIN--connected to IO control data transmission
5. CLK--connected to IO control SPI bus
6. BL--connected to the high-level chip 3.3V backlight is always bright, then this IO can save
IO for standard wiring: (6 IO)
1. RST--connected to IO control LCD reset
2. CE--connected IO control chip selection
3. D/C--connected to IO control register selection
4. DIN--connected to IO control data transmission
5. CLK--connected to IO control SPI bus
6. BL--connect IO control backlight on or off or PWM control brightness
Package includes:
3 x LCD module
Package includes:
3 x LCD module
3pcs 1.8 Inch LCD TFT Display Module With PCB Backplane 128X160 SPI Serial Port See detail