10pcs DC5-12V With Coded Wireless Transmitter Module 433MHz Remote Control

Get 10pcs DC5-12V With Coded Wireless Transmitter Module 433MHz Remote Control

Overview:

The module has a wide operating voltage range (DC5V-12V), high transmission power, low power consumption, and can be directly applied with a coding IC.
The data code and address code can be directly jumped, which is convenient and widely used in simple data wireless transmission, anti-theft alarm and other occasions.

Instructions for use:

The module has led two wires, which are connected to the positive and negative poles of the power supply, and the voltage is DC5-12V. Each launch can be realized directly by controlling the on/off of the power supply, and the time is not more than 5 seconds. A0~A7 is the 8-bit address code setting area, and the left side D0~D3 is the four-digit data code setting area. The cap sets the coding and data bits, and the antenna is connected (the multi-strand copper wire is about 23CM).

Technical parameter:

Working voltage: 5-12V

Emission current: 10mA

Transmission frequency: 433MHZ

Shooting distance: 200 meters (empty, receiving sensitivity -110dB)

Size: 38.2*19.5*8.7mm

Coding chip: SC2262 (PT2262)

Coding method: Jumper cap interpolation

Oscillation resistance: 4.7M

Package includes:

10 x Wireless Transmitter Module

10pcs DC5-12V With Coded Wireless Transmitter Module 433MHz Remote Control See detail

Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector

Get Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector Feature: Rated Voltage: 600V/2.5KV Rated Current: 32A Soild Wire Size: 0.08-2.5mm 2 /28-14AWG Multi-folded Soft Wire Size: 0.08-4mm 2 /28-12AWG Strip Length: 9-10mm/0.35-0.39inch Plastic Material: PA66 V-2 Shrapnel: Stainless Steel Contact Material: Electrolytic Copper Nickel Tin Ambient Temperature: -40 ~ +105 degree Package included: 1 x SPL-4 Wire Connector Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector See detail

V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver

Get V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver Features: Professional intelligent dual wireless microphone system with VHF 170-280MHz section, wide frequency response and high signal-to-noise ratio performance. High-precision quartz crystal frequency-locking technology that resists strong interference and minimizes RF interference and noise generated by other electronic and digital devices. A double-way channel design: Smooth expression without interference, providing clear, noise-free wireless transmission and excellent sound reproduction. Dual independent antennas: Features VHF wireless system to have more transmitter range and be less prone to electric appliance interference. VHF narrowband system, dual frequency design(channel A/B). Dual channel voice distribution, independent adjustable volume control. With LCD screen. In a good environment, a wide range of about 90-120ft, 1/4-inch mixed audio output j

RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag

Get RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag Features : -The MF RC522 is a highly integrated read/write card chip for 13.56MHz contactless communication. -This module can be directly loaded into various reader molds. The module adopts a voltage of 3.3V. -It can be directly connected to any CPU board of the user through several simple lines of the SPI interface, which can ensure stable and reliable operation of the module and long reading distance. - The module uses SPI to communicate with microcontrollers. The open-hardware community already has a lot of projects exploiting the RC522 – RFID Communication, using Arduino. RC522 - RFID Reader / Writer Features - Integrated MF RC522 - Low-voltage, low-cost, small size of the non-contact card chip to read and write - Suitable for Smart meters and portable handheld devices - Advanced modul

Zemfira Aksenova

Search This Blog