DIY Tesla Coil Module Kit Ion Windmill Tesla Coil ZVS Technology Physical Electronics Production Parts
Parameters:
Power supply input voltage: 24V DC;
Power supply current: 2A-3A;
Power supply interface: positive and negative within 5.5-2.1;
Audio interface: 3.5 audio port;
Product size: length 8.5CM x width 8.5CM x height 20CM;
Secondary coil size: diameter 4CM height 10CM or so;
Number of coil turns: 370 turns, the enameled wire with a coil diameter of 0.2, we are winding when the coil is shipped;
The resulting volume is almost the same as a 0.25W speaker;
Audio interface: 3.5 jack, you can connect to the audio source of mobile phone, mp3, computer. (The computer audio interface is 3.5, the audio cable used is 3.5 to 3.5 audio cable, the mobile phone and MP3 interface are different, please use the corresponding audio cable to 3.5) If you use other voltage or current that does not meet the requirements, the power supply or positive and negative Extremely reversed, there will be devices burned, and the losses caused by the buyer will be at the buyer's own risk.
Some buyers think that the power supply is 24V, then the input 12V device will not be damaged. This understanding is wrong. The circuit eventually constitutes the oscillation circuit.
If the voltage and current are not enough, the circuit will not oscillate, which will cause the triode to conduct directly to the ground, and the triode will burn out.
About the safety instructions:
The extremely high voltage will break through the air, producing a purple arc, which is the ion wind. The generated arc will have a certain thrust, and will oscillate under the action of the thrust. As the strength of the swing increases, it will rotate. It is worth mentioning that although the voltage is very high, but because of the extremely small current, and high-frequency discharge, it does not reach the intensity of injury! But the ionic wind will have a high heat, so when you touch it by hand, it is like touching a candle! It is not dangerous to master the distance and skill and not to call yourself hot. But the owner still does not recommend touching.
Please note that when using the power, first turn on the 220V to 24V switching power supply, after a delay of 1-2 seconds, then turn on the Tesla power switch after the power supply voltage is stable. When the power is off, first turn off the Tesla switch, then turn off the 220V to 24V switching power supply. This is because the switching power supply generally has a slow start function, that is, the output voltage rises slowly after the power is turned on, and if the Tesla is turned on before the voltage rises to 15V, it will not start due to insufficient starting voltage, resulting in The triode is turned on to ground to burn the components.
The magical Tesla coil generates high temperature and high pressure plasma, can ignite, can wirelessly transmit electricity, can illuminate LED, manifold, energy saving lamp, etc., can connect MP3, computer, mobile phone audio through audio cable, let the arc sing and play Music, while watching a small arc that can be rotated, a lot of fun, very interesting scientific experiment small production.
DIY parts delivery list:
Package included:
1 x DIY Tesla Coil Module Kit
Power supply input voltage: 24V DC;
Power supply current: 2A-3A;
Power supply interface: positive and negative within 5.5-2.1;
Audio interface: 3.5 audio port;
Product size: length 8.5CM x width 8.5CM x height 20CM;
Secondary coil size: diameter 4CM height 10CM or so;
Number of coil turns: 370 turns, the enameled wire with a coil diameter of 0.2, we are winding when the coil is shipped;
The resulting volume is almost the same as a 0.25W speaker;
Audio interface: 3.5 jack, you can connect to the audio source of mobile phone, mp3, computer. (The computer audio interface is 3.5, the audio cable used is 3.5 to 3.5 audio cable, the mobile phone and MP3 interface are different, please use the corresponding audio cable to 3.5) If you use other voltage or current that does not meet the requirements, the power supply or positive and negative Extremely reversed, there will be devices burned, and the losses caused by the buyer will be at the buyer's own risk.
Some buyers think that the power supply is 24V, then the input 12V device will not be damaged. This understanding is wrong. The circuit eventually constitutes the oscillation circuit.
If the voltage and current are not enough, the circuit will not oscillate, which will cause the triode to conduct directly to the ground, and the triode will burn out.
About the safety instructions:
The extremely high voltage will break through the air, producing a purple arc, which is the ion wind. The generated arc will have a certain thrust, and will oscillate under the action of the thrust. As the strength of the swing increases, it will rotate. It is worth mentioning that although the voltage is very high, but because of the extremely small current, and high-frequency discharge, it does not reach the intensity of injury! But the ionic wind will have a high heat, so when you touch it by hand, it is like touching a candle! It is not dangerous to master the distance and skill and not to call yourself hot. But the owner still does not recommend touching.
Please note that when using the power, first turn on the 220V to 24V switching power supply, after a delay of 1-2 seconds, then turn on the Tesla power switch after the power supply voltage is stable. When the power is off, first turn off the Tesla switch, then turn off the 220V to 24V switching power supply. This is because the switching power supply generally has a slow start function, that is, the output voltage rises slowly after the power is turned on, and if the Tesla is turned on before the voltage rises to 15V, it will not start due to insufficient starting voltage, resulting in The triode is turned on to ground to burn the components.
The magical Tesla coil generates high temperature and high pressure plasma, can ignite, can wirelessly transmit electricity, can illuminate LED, manifold, energy saving lamp, etc., can connect MP3, computer, mobile phone audio through audio cable, let the arc sing and play Music, while watching a small arc that can be rotated, a lot of fun, very interesting scientific experiment small production.
DIY parts delivery list:
Component name | quantity |
PCB board | 1 |
6.8K resistor | 2 |
10K resistor | 2 |
2W 100 ohm resistor | 1 |
Winding secondary coil | 1 |
Wafer plug | 2 |
Sun flower heat sink | 1 |
Small fan | 1 |
M2.5*6 self-tapping screws | 3 |
105 monolithic capacitor | 3 |
2*5*7 LED Blue | 1 |
3.5 audio seat | 1 |
DC005 seat | 1 |
A03 self-locking switch | 1 |
M3*8 screw | 13 |
M3*15 double pass copper column | 12 |
C2078 | 1 |
IRPF260 | 1 |
M3*16 screw | 5 |
Acrylic gasket | 14 |
Silicone bag | 2 |
0.1MM enameled wire | 1 |
0.35 enameled wire 15CM | 1 |
Copper needle | 1 |
1.0 enameled wire 30CM | 1 |
Insulating sheet | 1 |
Package included:
1 x DIY Tesla Coil Module Kit
DIY Tesla Coil Module Kit Ion Windmill Tesla Coil ZVS Technology Physical Electronics Production Parts See detail