5pcs 3-color Full Color LED SMD Module Board KY-009 5050 For Arduino MCU

Get 5pcs 3-color Full Color LED SMD Module Board KY-009 5050 For Arduino MCU

Overview:

The RGB LED module is made of a full-color LED chip. The PWM voltage input of the three pins R, G, and B can adjust the intensity of the three primary colors (red/blue/green) to achieve full-color color mixing. Cool lighting effects can be achieved with the control of the module.

Features:

1. Use 5050 full color LED

2. RGB three primary color connected to the current limiting resistor to prevent burnout

3. Adjust the three primary colors by PWM to get different colors

4. Can interface with various microcontrollers

5. Working voltage: 5V

6. LED drive mode: common negative drive

Package includes:

5 x Module

5pcs 3-color Full Color LED SMD Module Board KY-009 5050 For Arduino MCU See detail

Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector

Get Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector Feature: Rated Voltage: 600V/2.5KV Rated Current: 32A Soild Wire Size: 0.08-2.5mm 2 /28-14AWG Multi-folded Soft Wire Size: 0.08-4mm 2 /28-12AWG Strip Length: 9-10mm/0.35-0.39inch Plastic Material: PA66 V-2 Shrapnel: Stainless Steel Contact Material: Electrolytic Copper Nickel Tin Ambient Temperature: -40 ~ +105 degree Package included: 1 x SPL-4 Wire Connector Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector See detail

V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver

Get V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver Features: Professional intelligent dual wireless microphone system with VHF 170-280MHz section, wide frequency response and high signal-to-noise ratio performance. High-precision quartz crystal frequency-locking technology that resists strong interference and minimizes RF interference and noise generated by other electronic and digital devices. A double-way channel design: Smooth expression without interference, providing clear, noise-free wireless transmission and excellent sound reproduction. Dual independent antennas: Features VHF wireless system to have more transmitter range and be less prone to electric appliance interference. VHF narrowband system, dual frequency design(channel A/B). Dual channel voice distribution, independent adjustable volume control. With LCD screen. In a good environment, a wide range of about 90-120ft, 1/4-inch mixed audio output j

RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag

Get RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag Features : -The MF RC522 is a highly integrated read/write card chip for 13.56MHz contactless communication. -This module can be directly loaded into various reader molds. The module adopts a voltage of 3.3V. -It can be directly connected to any CPU board of the user through several simple lines of the SPI interface, which can ensure stable and reliable operation of the module and long reading distance. - The module uses SPI to communicate with microcontrollers. The open-hardware community already has a lot of projects exploiting the RC522 – RFID Communication, using Arduino. RC522 - RFID Reader / Writer Features - Integrated MF RC522 - Low-voltage, low-cost, small size of the non-contact card chip to read and write - Suitable for Smart meters and portable handheld devices - Advanced modul

Zemfira Aksenova

Search This Blog