MoesHouse Automatic ATS Dual Power Transfer Switch Solar Charge Controller for Solar Wind System DC 12V 24V 48V AC 110V 220V on/off Grid

Get MoesHouse Automatic ATS Dual Power Transfer Switch Solar Charge Controller for Solar Wind System DC 12V 24V 48V AC 110V 220V on/off Grid

Feature:

- New item release: The controller allows for trouble-free operation of inverters and AC mains in the same circuit. The controller switches automatically between inverter and AC mains while protecting the inverter against external voltage.

- Works like an UPS, But in opposite direction: The controller will switch to grid when batteried are low to cut off point, once the batteries are back to recovery point, it will switch back to battery power.

- Great for solar and wind: Automatically switches over to grid power on those cloudy or windless days and your batteries get low, Take charge over your battery bank.

- Auto distinguish for DC 12/24/48V, AC 110/220V

- LCD display

- Transfer Time: Less than 10ms

- Adjustable battery cut off low voltage and recovery voltage.

Parameter:

Rated power: 11kw/5.5kw

Input voltage: Auto distinguish: AC 100-120V or AC 220-240V

Output voltage: Auto distinguish: AC 100-120V or AC 220-240V

Transfer time: Inverter transfer to public power less than 10ms, Public power transfer to inverter less than 16ms

LCD display: Woking status of Public power, inverter and battery

System voltage: Auto Distinguish: 12V or 24V or 48V

BAT. Low Cut-down: Default 11V/22V/44V, adjustable

BAT. Low Recovery: Default 13.5V/27V/54V, Adjustable

Application: Off-grid solar or wind system

Product size: 19*17*7.25cm(7.4in*6.7in*2.8in)

N.W/PC: 1.26KG

G.W/PC: 1.63KG

Package included:

1 x Solar Charge Controller

MoesHouse Automatic ATS Dual Power Transfer Switch Solar Charge Controller for Solar Wind System DC 12V 24V 48V AC 110V 220V on/off Grid See detail

Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector

Get Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector Feature: Rated Voltage: 600V/2.5KV Rated Current: 32A Soild Wire Size: 0.08-2.5mm 2 /28-14AWG Multi-folded Soft Wire Size: 0.08-4mm 2 /28-12AWG Strip Length: 9-10mm/0.35-0.39inch Plastic Material: PA66 V-2 Shrapnel: Stainless Steel Contact Material: Electrolytic Copper Nickel Tin Ambient Temperature: -40 ~ +105 degree Package included: 1 x SPL-4 Wire Connector Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector See detail

V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver

Get V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver Features: Professional intelligent dual wireless microphone system with VHF 170-280MHz section, wide frequency response and high signal-to-noise ratio performance. High-precision quartz crystal frequency-locking technology that resists strong interference and minimizes RF interference and noise generated by other electronic and digital devices. A double-way channel design: Smooth expression without interference, providing clear, noise-free wireless transmission and excellent sound reproduction. Dual independent antennas: Features VHF wireless system to have more transmitter range and be less prone to electric appliance interference. VHF narrowband system, dual frequency design(channel A/B). Dual channel voice distribution, independent adjustable volume control. With LCD screen. In a good environment, a wide range of about 90-120ft, 1/4-inch mixed audio output j

RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag

Get RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag Features : -The MF RC522 is a highly integrated read/write card chip for 13.56MHz contactless communication. -This module can be directly loaded into various reader molds. The module adopts a voltage of 3.3V. -It can be directly connected to any CPU board of the user through several simple lines of the SPI interface, which can ensure stable and reliable operation of the module and long reading distance. - The module uses SPI to communicate with microcontrollers. The open-hardware community already has a lot of projects exploiting the RC522 – RFID Communication, using Arduino. RC522 - RFID Reader / Writer Features - Integrated MF RC522 - Low-voltage, low-cost, small size of the non-contact card chip to read and write - Suitable for Smart meters and portable handheld devices - Advanced modul

Zemfira Aksenova

Search This Blog