3pcs HC-06 bluetooth RF Transceiver RS232 With Backplane Wireless Serial 4P 4 Pin Module Board For Arduino

Get 3pcs HC-06 bluetooth RF Transceiver RS232 With Backplane Wireless Serial 4P 4 Pin Module Board For Arduino

Features:

Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.

Commercial Series: Bluetooth module board Series

With LED indicator light, use 150mA and 3.3V regulation chip.

With VCC. GND. TXD. RXD foot for the Bluetooth

With "Research" button(ON/OFF/WAKE foot for it, external MCU output "High level" can control module to research)

Compatible with bluetooth master module".slave module"or master-slave(whole) module.

Input voltage: 3.3~6V

Size: 1.55 x 3.98cm

Specification:

Works with any USB Bluetooth adapters.

Default Baud Rate: 9600,8,1,n.

Built-in antenna.

Coverage up to 30ft.

Bluetooth version: V2.0+EDR

Operating voltage: 3.3V

Default Baud Rate: 9600,8,1,n.

Signal coverage: 30ft

Cable length: about 21.5cm

Item size: about 3.5 * 1.5 cm

Item weight: 7g

Package weight: 9g

Note:

input power supply 3.3~6V, Prohibit more than 7V

No "Automatically prevent power supply reversing function", so please correctly connect the power supply

We advise installing "Bluetooth master module"

The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"

If only the board, No any "Bluetooth Function "

Package includes:

3 x bluetooth Module

3pcs HC-06 bluetooth RF Transceiver RS232 With Backplane Wireless Serial 4P 4 Pin Module Board For Arduino See detail

Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector

Get Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector Feature: Rated Voltage: 600V/2.5KV Rated Current: 32A Soild Wire Size: 0.08-2.5mm 2 /28-14AWG Multi-folded Soft Wire Size: 0.08-4mm 2 /28-12AWG Strip Length: 9-10mm/0.35-0.39inch Plastic Material: PA66 V-2 Shrapnel: Stainless Steel Contact Material: Electrolytic Copper Nickel Tin Ambient Temperature: -40 ~ +105 degree Package included: 1 x SPL-4 Wire Connector Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector See detail

V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver

Get V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver Features: Professional intelligent dual wireless microphone system with VHF 170-280MHz section, wide frequency response and high signal-to-noise ratio performance. High-precision quartz crystal frequency-locking technology that resists strong interference and minimizes RF interference and noise generated by other electronic and digital devices. A double-way channel design: Smooth expression without interference, providing clear, noise-free wireless transmission and excellent sound reproduction. Dual independent antennas: Features VHF wireless system to have more transmitter range and be less prone to electric appliance interference. VHF narrowband system, dual frequency design(channel A/B). Dual channel voice distribution, independent adjustable volume control. With LCD screen. In a good environment, a wide range of about 90-120ft, 1/4-inch mixed audio output j

RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag

Get RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag Features : -The MF RC522 is a highly integrated read/write card chip for 13.56MHz contactless communication. -This module can be directly loaded into various reader molds. The module adopts a voltage of 3.3V. -It can be directly connected to any CPU board of the user through several simple lines of the SPI interface, which can ensure stable and reliable operation of the module and long reading distance. - The module uses SPI to communicate with microcontrollers. The open-hardware community already has a lot of projects exploiting the RC522 – RFID Communication, using Arduino. RC522 - RFID Reader / Writer Features - Integrated MF RC522 - Low-voltage, low-cost, small size of the non-contact card chip to read and write - Suitable for Smart meters and portable handheld devices - Advanced modul

Zemfira Aksenova

Search This Blog