Skip to main content

6W 3V 3.3V 4.2V 4.5V to 3.7V 5V 12V DC-DC Step Up Boost Converter for 18650 403040 Li-Po Li-ion Lithium Battery Module

6W 3V 3.3V 4.2V 4.5V to 3.7V 5V 12V DC-DC Step Up Boost Converter for 18650 403040 Li-Po Li-ion Lithium Battery Module
6W 3V 3.3V 4.2V 4.5V to 3.7V 5V 12V DC-DC Step Up Boost Converter for 18650 403040 Li-Po Li-ion Lithium Battery Module 6W 3V 3.3V 4.2V 4.5V to 3.7V 5V 12V DC-DC Step Up Boost Converter for 18650 403040 Li-Po Li-ion Lithium Battery Module 6W 3V 3.3V 4.2V 4.5V to 3.7V 5V 12V DC-DC Step Up Boost Converter for 18650 403040 Li-Po Li-ion Lithium Battery Module



Description:
 
DC DC Boost Converter Module working frequency 1MHZ.
Up to 94% Efficiency (usually is 84%-91%)
Quiescent current: 0.19MA.
Operating temperature range: -40~+85 Degrees Celsius
Storage temperature range: -65~+150 Degrees Celsius
Size: 13 x 11 x 5.2mm(Ultra small & Ultra-thin) 
Weight:  1g(Ultralight)
 
Protection:
 
Over current protection(OCP)
Over voltage protection(OVP)
Short circuit protection(SCP)
Over temperature protection(OTP) 
 
Pin description:
 
VI: Input positive(+)
GND: Input and Output negative(GND/-)
VO: Output positive(+)
 
Output 3.7V:
 
Input voltage: DC 2.6 ~ 4.5V, output: DC 5V±3%
Maximum output: 5V/1200MA (See the table below for details)

Input VoltageInput CurrentOutput VoltageOutput Current
2.8V1.52A3.7V0.95A
3V1.52A3.7V1.00A
3.3W1.55A3.7W1.20A
 
Output 5V:
 
Input voltage: DC 2.6 ~ 4.5V, output: DC 5V±3%
Maximum output: 5V/1200MA (See the table below for details)

Input VoltageInput CurrentOutput VoltageOutput Current
2.8V1.43A5V0.65A
3V1.45A5V0.72A
3.3V1.47A5V0.82A
3.7V1.49A5V0.92A
4.2V1.50A5V1.00A
4.5V1.54A5V1.20A
 
Output 12V :
 
Input voltage: DC 2.6 ~ 6V, output: DC 12V±3%
Maximum output: 12V/500MA (See the table below for details)

Input VoltageInput CurrentOutput VoltageOutput Current
3V0.70A12V0.15A
3.3V1.20A12V0.28A
3.7V1.25A12V0.34A
4.2V1.25A12V0.39A
4.5V1.25A12V0.42A
5V1.30A12V0.50A
 
Applications:
 
Battery-powered equipment
Instrumentation, multimeter
Small power motors
PTZ Camera webcam
IP Camera
Toy car boat
Model aircraft
power bank
LED Lighting
WIFI Router 
PLC RS485 devices
Lithium battery power supply equipment
 
Attention:
 
This is a DC-DC voltage converter module, Must be noted when using:
1. Input voltage can not be greater than the maximum input range
2. Output power can not be greater than the maximum load for a long time
3. Input power must be greater than the output power, because of the power consumption of the module itself
 
Q & A:
 
Q: Why output voltage is less than the nominal voltage
A: Input power supply power is too low. Test the input voltage with a multimeter, at this time of the input voltage is very low
 
Package includes:
 
1 x 6W mini 2.6-6V to 3.7V 5V 12V Boost Voltage Regulator Module


















6W 3V 3.3V 4.2V 4.5V to 3.7V 5V 12V DC-DC Step Up Boost Converter for 18650 403040 Li-Po Li-ion Lithium Battery Module See detail


Popular posts from this blog

5pcs AC 100-240V to DC 12V 5A 60W Switching Power Supply Module Driver Adapter LED Strip Light

Get 5pcs AC 100-240V to DC 12V 5A 60W Switching Power Supply Module Driver Adapter LED Strip Light Features:   1. Good anti-interference performance and high reliability. 2. Low operating temperature and long service life. 3. Wide input voltage range, (100-240V) in line with global usage standards. 4. Good insulation performance and high electric strength. 5. Full load high temperature burning machine, 100% aging test.   Specifications:   Model: HS-60-12 DC output voltage: 12V Output voltage tolerance: ±1% Rated output current: 5A Output current range: 0 - 5A Ripple and noise: 100mVp-p Line stability: ±0.5% Load stability: ±0.5% DC output power: 60W Efficiency: 85% DC voltage adjustable range: ±10% Input voltage range: 100 ~ 240VAC 47 ~ 63Hz; 120-370VDC Input current: 2A/115V 1A/230V Inrush current: cold start current 30A/115V 60A/230V Leakage current: <3.5mA/240VAC Overload protection: 105%~150% Overvoltage protection: 15%-135% Tempera...

BaoFeng Replacement Cable Waterproof Hand Microphone Solid with Indicate Light Electronics Walkie Talkie Clamp Durable Parts for BF 5r

Get BaoFeng Replacement Cable Waterproof Hand Microphone Solid with Indicate Light Electronics Walkie Talkie Clamp Durable Parts for BF 5r Features : - Rainproof - With anti noise design microphone for clear communication. - These mics will clip to our backpack straps at our shoulder or in front for easy access and convenient communications. It is also easier to use these mics while in the car with your handy-talkies.   Specification : All of our items are Brand New Has a remote microphone with push to talk button you can clip anywhere. The Handheld microphone can be easily worn on the body through a clip and easy to carry. Two-pin standard diameter: Ear 3.5mm stereo (top pin). Mic 2.5mm stereo (bottom pin). Space of two-pin: 11mm. Compatible model: UV5R,UV5RA,F8,F8+,UV-82,DM-5R Plus,BF-888,BF-888s   Package includeds : 1 x Rainproof Speaker Mic   Details pictures : BaoFeng Replacement Cable Waterproof Hand Microphone Solid with In...

XH-W1321 0.1 Digital Thermostat Mini Embedded Digital Display Switch Temperature Controller With Waterproof NTC Sensor Meter

Get XH-W1321 0.1 Digital Thermostat Mini Embedded Digital Display Switch Temperature Controller With Waterproof NTC Sensor Meter Specifications:   Product Name: Miniature embedded digital display thermostat Product Model: XH-1321 Material: ABS Case Color: White LED Color: Red/Blue (Optional) Input Voltage: DC12V Temperature Measurement Range: -50-110℃  Temperature Control Range: -50-110℃  Control Accuracy: 0.1℃  Display Accuracy: 0.1℃  Measuring Input: NTC10K Waterproof Probe L=1 Meter Output Type: Relay Output(Output Switch)  Output Capacity: 10A Size (Length x Width x Height): about 56 x 38 x 32mm (2.17 x 1.50 x 1.26” )  Opening hole size: 46 x 34mm Key Function:   SET: Press once during normal use, directly enter the stop temperature setting state, use the up and down keys to set the required stop temperature, long press to enter the internal setting menu. UP: After long press the setting button to enter the internal setting, increase t...