Skip to main content

3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560

3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560
3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560 3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560 3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560



Description:

Support Arduino UNO and Arduino Mega2560 and other development board DIP, Without any wiring, all open source, Arduino libraries offer
The backlight always on, can not control the backlight, backlight is connect to 3.3V
DC: 5V

More information: >>>>Click here<<<<


Note:

The control and driving circuit of TFT modules is low voltage and  FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity: 

1. Using soldering iron or  power FRIDA tools must be well grounded and operation, make them without leakage;
2. Do not use hand to touch the leads, circuit boards and metal boxes;
3. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity;
4. When the air is dry, can also generate static electricity, therefore, workshop humidity  shall be above RH60%;
5. If it is necessary to direct contact it , should enable the human body in the same potential with the modules? ,ormake  human body be well grounded;
6. Remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing.
 
Package included:

3 x 3.5 Inch TFT Color Screen Module 320 X 480 Support Arduino UNO Mega2560






















3pcs 3.5 Inch TFT Color Display Screen Module 320 X 480 Support Arduino UNO Mega2560 See detail


Popular posts from this blog

SX1308 DC-DC 2V-24V to 2V-28V 2A Adjustable Boost Regulated Power Supply Module High Current

Get SX1308 DC-DC 2V-24V to 2V-28V 2A Adjustable Boost Regulated Power Supply Module High Current Introduction:   The SX1308 boost module is equipped with the SX1308 chip, which has a small package and high efficiency. The output is adjustable up to 28V, and the internal integration of very low RDS internal resistance 100mΩ metal oxide semiconductor field effect transistor (MOSFET) can achieve high current output within 2A. Widely used in 3G network products, digital products, mobile power, battery-powered equipment.   Features:   Oscillation frequency 1.2MHz, efficiency up to 95% The circuit has short circuit protection, overheat protection and other functions 10K price potentiometer, adjust voltage output   Parameters:   Input voltage range: DC 2V-24V Output voltage range: DC 2V-28V Switching frequency: 1.2MHz Output current: ≤ 2A Package includes: 1 x Power supply module SX1308 DC-DC 2V-24V to 2V-28V 2A Adjustable Boost Regulate...

Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector

Get Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector Feature: Rated Voltage: 600V/2.5KV Rated Current: 32A Soild Wire Size: 0.08-2.5mm 2 /28-14AWG Multi-folded Soft Wire Size: 0.08-4mm 2 /28-12AWG Strip Length: 9-10mm/0.35-0.39inch Plastic Material: PA66 V-2 Shrapnel: Stainless Steel Contact Material: Electrolytic Copper Nickel Tin Ambient Temperature: -40 ~ +105 degree Package included: 1 x SPL-4 Wire Connector Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector See detail

LM2596S DC-DC 24V/12V To 5V 5A Step Down Power Supply Buck Converter Adjustable USB Step-down Charging Module

Get LM2596S DC-DC 24V/12V To 5V 5A Step Down Power Supply Buck Converter Adjustable USB Step-down Charging Module Features: Synchronous rectification scheme, wide voltage input, high current output, high efficiency. With DC plug and terminals, easy to use. With USB port, with fast-charge identification chip compatible with Andrews and iphone mobile phone.   Product parameters:   Input voltage: DC 9V - 36V The output voltage: 5.2V / 5A / 25W Output capability:  9 ~ 24V Input: Output 5.2V / 6A / 30W                              24 ~ 32V Input: Output 5.2V / 5A / 25W                              32 ~ 36V Input: Output 5.2V / 3.5A / 18W Size: 63 x 27 x 10mm (L * W * H) Weight: 22g   Package included: 1 x LM2596S DC-DC 24V/12V To 5V 5A Step Down Module LM2596S DC-DC 24V/12V To 5V 5A Step Down Power Supply Buck Converter Adjustable USB Step-down Charging Module See detail