Skip to main content

VStarcam C53 720P HD POE Night Vision IP Camera Support Motion Alarm IP66 Waterproof Remote Viewing Cloud Service

VStarcam C53 720P HD POE Night Vision IP Camera Support Motion Alarm IP66 Waterproof Remote Viewing Cloud Service
VStarcam C53 720P HD POE Night Vision IP Camera Support Motion Alarm IP66 Waterproof Remote Viewing Cloud Service VStarcam C53 720P HD POE Night Vision IP Camera Support Motion Alarm IP66 Waterproof Remote Viewing Cloud Service VStarcam C53 720P HD POE Night Vision IP Camera Support Motion Alarm IP66 Waterproof Remote Viewing Cloud Service



Features :

720P HD IP Camera.
POE Power Supply.
Night Vision.
Motion Detect.
IP66 Waterproof.
Remote Viewing.
Cloud Service.

 
Specification :

SystemOperation systemEmbedded Linux OS 
Online visitorSupport 4 visitors at the same time
Image CaptureImage sensor1/4 inch 720p Progressive Scan CMOS
Minimum Illumination0.3-0.5Lux (Color mode), 0.1Lux (B&W Mode)
Lens4.0mm@F2.1
View Angle71.1° (diagonal)
Night visionDual Filter, IR-Cut, 18pcs 850nm SMD IR LED
IR irradiation distance: 10~15m
VideoEncode formatH.264 main profile@levels: 4.0/Motion-JPEG
Three StreamMain Stream: 720p(1280X720)@25fps
Sub Stream: 360p(640X360)@25fps
Third Stream: 180p(320X180)@10fps
Bit Rate128-4096kbps
Maximum frame rate25 fps
Image adjustmentContrast/Brightness/Saturation/Hue
NetworkEthernet10Base-T/100Base-TX, RJ45 connector
ProtocolsTCP/IP, HTTP, TCP, UDP, DHCP, DNS, NTP, RTSP, P2P etc
AlarmAlarm TriggerMotion detect
Physical
Environmental
Rated voltageDC12V±5%
Power consumptionRelated power: 6W(IR on)
Operating conditionTemperature: -10 to 50℃, humidity: <90%
WeightGross: 450g(Note: in kind prevail)
Package size205*107*78mm(L×W×H)

Package includeds :

1 x VStarcam C53 720P POE IP Camera
1 x English User Manual
1 x Set of Installation Accessories
***Power Supply is not included***

 
Details pictures :














VStarcam C53 720P HD POE Night Vision IP Camera Support Motion Alarm IP66 Waterproof Remote Viewing Cloud Service See detail


Popular posts from this blog

Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector

Get Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector Feature: Rated Voltage: 600V/2.5KV Rated Current: 32A Soild Wire Size: 0.08-2.5mm 2 /28-14AWG Multi-folded Soft Wire Size: 0.08-4mm 2 /28-12AWG Strip Length: 9-10mm/0.35-0.39inch Plastic Material: PA66 V-2 Shrapnel: Stainless Steel Contact Material: Electrolytic Copper Nickel Tin Ambient Temperature: -40 ~ +105 degree Package included: 1 x SPL-4 Wire Connector Wire Connector SPL-4 Quick Terminal 4 Position Docking Connector High Power Connector See detail

V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver

Get V3002 VHF Wireless Microphone System 2PCS Handheld LCD Mic with 2 CH Receiver Features: Professional intelligent dual wireless microphone system with VHF 170-280MHz section, wide frequency response and high signal-to-noise ratio performance. High-precision quartz crystal frequency-locking technology that resists strong interference and minimizes RF interference and noise generated by other electronic and digital devices. A double-way channel design: Smooth expression without interference, providing clear, noise-free wireless transmission and excellent sound reproduction. Dual independent antennas: Features VHF wireless system to have more transmitter range and be less prone to electric appliance interference. VHF narrowband system, dual frequency design(channel A/B). Dual channel voice distribution, independent adjustable volume control. With LCD screen. In a good environment, a wide range of about 90-120ft, 1/4-inch mixed audio output j

RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag

Get RFID-RC522 RF IC Card Reader Sensor Module with S50 Blank Card and Key Ring for Arduino Raspberry Pi, 40pin Male to Female Jumper Wires RFID Tag Features : -The MF RC522 is a highly integrated read/write card chip for 13.56MHz contactless communication. -This module can be directly loaded into various reader molds. The module adopts a voltage of 3.3V. -It can be directly connected to any CPU board of the user through several simple lines of the SPI interface, which can ensure stable and reliable operation of the module and long reading distance. - The module uses SPI to communicate with microcontrollers. The open-hardware community already has a lot of projects exploiting the RC522 – RFID Communication, using Arduino. RC522 - RFID Reader / Writer Features - Integrated MF RC522 - Low-voltage, low-cost, small size of the non-contact card chip to read and write - Suitable for Smart meters and portable handheld devices - Advanced modul