Features:
1. Output the data of the 6-axis or 9-axis rotation matrix, quaternion, and Euler Angle forma.
2. Three-axis angular velocity sensor (gyroscope) with 131 LSBs/°/sec sensitivity and full-range sensing range of ±250, ±500, ±1000 and ±2000°/sec.
3. Programmable, 3-axis accelerator with program control range of ±2g, ±4g, ±8g and ±16g.
Remove the sensitivity between the accelerator and the gyroscope axis, reducing the effect of the setting and the drift of the sensor.
4. The Digital Motion Processing (DMP) engine reduces the load of complex fusion calculation data, sensor synchronization, and posture sensing. The motion processing database supports Android, Linux and Windows built-in operating time offsets and magnetic sensor calibration algorithms, eliminating the need for additional calibration.
5. Temperature sensor with digital output
6. Support digital video image stabilization technology and GPS with digital input sync pin (Sync pin)
7. Programmable interrupts support gesture recognition, panning, zooming in and out, scrolling, fast falling interrupts, high-G interrupts, zero motion sensing, touch sensing, and shaking sensing.
8. VDD supply voltage is 2.5V±5%, 3.0V±5%, 3.3V±5%; VDDIO is 1.8V± 5%
Gyro operating current: 5mA, gyroscope standby current: 5uA; accelerator operating current: 500uA, accelerator power saving mode current: 40uA@10Hz
9. Up to 400kHz fast mode I2C, or up to 20MHz SPI serial host interface (serial hostinterface)
10. The built-in oscillator has only a ±1% frequency change over the operating temperature range. Optional external clock input 32.768kHz or 19.2MHz.
Note:
Package Included:
1 x MPU6050 Six-Axis Flight Control Module
MPU6050 Six-Axis Flight Control Module Compatible STM32 Development Board See detail